- Characteristics of Tantalum Powder Manufactured by the MR and EMR Process
-
Hyeoung-Ho Park, Jae-Sik Yoon, In-Sung Bae, Yang-Soo Kim, Dong-Ju Yoon, Dae-Hee Won, Byung-Il Kim
-
J Korean Powder Metall Inst. 2007;14(3):173-179.
-
DOI: https://doi.org/10.4150/KPMI.2007.14.3.173
-
-
 Abstract
 PDF
- In the metallothermic reduction (MR) process used to obtain tantalum powder in one batch, it is difficult to control the morphology and location of the tantalum deposits. On the other hand, an electronically mediated reaction (EMR) process is capable of overcoming this difficulty. The effect of using K_2TaF_7 as the raw material and sodium as the reducting agent on the characteristics of tantalum powder are investigated. As the temperature of the reduction varied from 1023K to 1223K, the powder particles obtained with MR were relatively large (sim34µm), while those prepared via EMR were of uniform (13µm). In the MR process, the Ta powder recovery rate increased from 37% to 83% at 1123K in constrat with EMR process.
- Characteristics of Tantalum Powder on the Location of Reductant by MR and EMR Combination Process
-
Hyeoung-Ho Park, Jae-Sik Yoon, In-Sung Bae, Yang-Soo Kim, Dong-Ju Yoon, Dae-Hee Won, Byung-Il Kim
-
J Korean Powder Metall Inst. 2007;14(3):190-196.
-
DOI: https://doi.org/10.4150/KPMI.2007.14.3.190
-
-
Abstract
PDF
- A process known as the MR and EMR combination process is able to overcome the shortcomings of the MR (metallothermic reduction) and EMR (electronically mediated reaction) process. The effects of K_2TaF_7 as the raw material, sodium as the reducing agent and KCl/KF as the diluent on the characteristics of tantalum powder are investigated. In this study, a MR-EMR combination process has been employed to tantalum powder on the location of reductant. The excess of reductant were varied from 25, 50 to 75 wt%. The total charge and external circuit decreases as the amount of reductant increases. The average particle size increases with increasing the amount of reductant.
|
kpmi
